Photo is for reference only. Color, veining, and shading vary between slabs. Visit our slabyard to select your material in person.

White Sapphire

₱5,700 per sqm

Origin: China
Surface Finish: Polished
Edges: Natural (Unpolished)
Thickness: 18 mm
Requires Sealing: No

Breakfast for four leaves crumbs the eye slides straight past. White Sapphire is built from chunky white and gray chips that break up daily mess, and at ₱5,700 per sqm it is our cheapest white quartz.

Origin	China
Surface Finish	Polished
Edges	Natural (Unpolished)
Thickness	18 mm
Requires Sealing	No

Get a FREE Quote Today!See Other Quartz Designs

Available at all 5 branches. Custom-fabricated and installed in 3-5 days.

Get a Quote

Why Choose White Sapphire Quartz

Stain-Resistant Manufactured rather than quarried, so it never needs sealing and nothing etches it.

Our Cheapest White Quartz ₱5,700 per sqm, below Moonstone at 6,200 and Cloudstone at 6,400, with identical thickness and durability.

Coarse Chips Hide Daily Use Chunky aggregate breaks up crumbs and water marks far better than a plain or lightly veined white.

Resists Chips and Scratches Engineered quartz resists wine, oil and coffee, and the surface holds up well to daily knife-and-pan traffic.

What Is White Sapphire Quartz?

Coarse white chips with gray and black punctuation.

White Sapphire is an engineered quartz built from chunky white and pale gray chips set in a bright white ground, with occasional darker fragments scattered through it. Those dark flecks are what give the surface its snap.

It is the boldest white we carry. Where a veined design suggests marble and a fine grain stays subtle, this reads unmistakably as terrazzo, and it does not pretend to be natural stone.

It is one of four colorways in the Sapphire range. All four share the same design, the same ₱5,700 per square meter price and the same specification, so the choice is color and contrast.

Being engineered rather than quarried, it is roughly 93% crushed natural stone bound with about 7% resin. That construction makes it stain-resistant, so it never etches and never needs sealing.

How Much Does a White Sapphire Countertop Cost?

Prices are subject to change without prior notice.

Item	Starting Rates
White Sapphire slab	₱5,700 per sqm
Fabrication	₱500 per lm
Installation	₱500 per lm
Sink or hob cut-outs	₱500 per set

Cut-out charges apply only when installation is included. Delivery is priced based on distance from your nearest Stone Depot branch.

Get a FREE Quote Today!

How Do You Clean White Sapphire Quartz?

Three habits, and a bright surface stays bright.

Clean as You Go

Coffee, turmeric and cooking oil sit on the surface rather than soaking in, so a soft cloth clears nearly every spill. The coarse aggregate hides more than a plain white would, but a pale ground still rewards the habit.

Use Only Quartz Cleaner

Dish soap leaves a film that dulls the polish over months, and on a bright white that dullness shows sooner. A pH-balanced quartz cleaner lifts residue without attacking the resin.

Never Scour It

Steel wool, scouring pads and abrasive powders scuff the polish permanently. A plastic scraper lifts anything dried on without leaving a mark.

We stock specially-formulated stone care products at every branch, so you are not guessing in a supermarket aisle.

How Do You Care for White Sapphire Quartz?

No sealing required, which leaves three rules.

Always Use Trivets

The resin binding the slab is heat-sensitive, so a pan straight off the burner can scorch or discolor it permanently. Heat is the most common way a quartz counter is ruined and no workmanship warranty covers it.

Keep It Out of Direct Sun

Quartz yellows under prolonged UV and the change cannot be reversed. That shift is most obvious on a white slab, so fit blinds where a counter catches afternoon sun and keep quartz installations indoors.

Skip Harsh Chemicals

Bleach, oven cleaner and high-pH products break down the resin over time. Never apply wax either, because it builds up and yellows against a white ground.

Is White Sapphire Quartz Good for Kitchen Countertops?

Yes, and the aggregate does real work.

Yes. Engineered quartz resists both etching and staining, so lemon juice, vinegar, wine and red sauce wipe away rather than marking the surface. That matters on a pale slab, where a stain would have nowhere to hide.

Hardness helps too. Quartz sits around 7 on the Mohs scale against marble at 3, so it resists the scratching that dulls a soft natural stone within a few years of ordinary cooking.

The chunky aggregate is the practical argument. It breaks up crumbs, water marks and general cooking evidence far better than a plain or lightly veined white, so this is the white that copes best with a kitchen in daily use.

The genuine limit is heat. A pan lifted straight off a burner can scorch the resin, and that damage cannot be polished out. Trivets are not optional on any quartz.

Does White Sapphire Quartz Need Sealing?

Nothing to seal — engineered quartz is manufactured rather than quarried.

No. Sealing works by filling the pore structure of a quarried stone so liquid cannot travel into it. A sealer does nothing for engineered quartz and, in some formulations, harms the resin.

The contrast with white natural stone is stark. A white marble needs sealing, etches where lemon juice lands and marks where a wine glass stands, and every one of those marks is plainly visible on white. White Sapphire does none of that.

Anyone selling you a sealer for a quartz counter is either mistaken or selling something you do not need. Cleaning is the whole maintenance routine.

White Sapphire vs the Rest of the Sapphire Range

One aggregate design, four colorways, one price.

White Sapphire is the brightest and boldest

Chunky white and gray chips with dark punctuation on bright white, at ₱5,700 per sqm. Choose it to lift a dark kitchen and when you want the terrazzo texture read clearly.

Beige Sapphire is the warm equivalent

Beige Sapphire is the same design in cream and tan. Pick between them on the room: white for cool and contemporary schemes, beige where timber and warm flooring already set the tone.

Gray Sapphire is the safer middle

Gray Sapphire takes the same chips onto mid gray. Less lift in a dark room, but it hides daily use better than any other color in the range.

Black Sapphire is the dark end

Black Sapphire sparkles under directional light. It anchors a room where this one opens it up.

What Colors Go With White Sapphire Quartz?

A busy white that wants calm around it.

There is already a lot happening in this surface, so the cabinetry is usually better kept plain. Flat-front doors in a single color let the aggregate be the texture in the room.

White and pale gray cabinetry give the cleanest result, and the counter reads as a continuation rather than a contrast. This is the safest route in a small kitchen.

Deep colors are where it earns its keep. Navy, forest green and charcoal all gain from a bright, busy counter above them, and the dark flecks in the slab tie back to the cabinetry rather than fighting it.

For hardware, chrome, brushed nickel and matte black all sit comfortably. Brass is the one to think about, because this is a cool white and brass will pull against it rather than with it.

Frequently Asked Questions

Is White Sapphire real stone?

No, not in the way a quarried slab is. It is engineered quartz, roughly 93% crushed natural stone bound with about 7% resin. The quartz is a natural mineral, but the slab is manufactured rather than quarried, which is why it never etches and never needs sealing. It contains no sapphire.

Is this the cheapest white quartz you carry?

Yes. At ₱5,700 per sqm it undercuts Moonstone at ₱6,200, Cloudstone at ₱6,400 and the veined whites at ₱8,500. The material, thickness and durability are the same across all of them.

How is it different from Moonstone quartz?

Both are white and both are grained, but at very different scales. White Sapphire has coarse, clearly visible chips that read as terrazzo. Moonstone has a fine, even grain that reads as a plain white until you are close to it.

Does it look like real marble?

No, and it is not trying to. This is an aggregate design with visible chips rather than veining. If you want a white counter that reads as marble, the Calacatta colorways at ₱8,500 are the ones to look at.

Can you put a hot pan on White Sapphire quartz?

No. The resin binding the slab scorches under direct heat and the mark cannot be polished out, which is especially unforgiving on white. Use trivets for anything coming off a burner or out of an oven.

Does White Sapphire quartz stain?

Stain-resistant, not stainproof. Spills sit on the surface rather than soaking in. Red wine, turmeric and coffee sit on the surface and wipe away easily, even though they look alarming on a pale ground while they are there.

Does the pattern need aligning across a seam?

No. The aggregate is evenly distributed and has no direction, so slabs can be laid whichever way suits the room and a seam does not have to be matched. That makes it straightforward for L-shaped kitchens and long runs.

Where can you buy White Sapphire quartz in the Philippines?

Stone Depot offers White Sapphire quartz at branches in Cebu, Davao, Cagayan de Oro, Iloilo and Laguna. Stock moves between locations, so availability varies.

It is worth seeing at full size, because the chips read much coarser on a slab than in a sample tile. All branches are open Monday to Saturday, 8 AM to 5 PM, and you are welcome to visit or contact any branch.

Send Your Plan and Get an Estimate Within 24 Hours

Free and no obligation. Or drop by any of our branches and we will provide you a quotation on the spot.