Tenax Solido (Stone Adhesive)

1,600

Available in Black, White, and Transparent.
₱1,600 – ₱1,900 depending on color.

A chipped island corner, the kind a fabricator fills rather than replaces. Tenax Solido (Stone Adhesive) bonds stone to stone and packs chips and seams, and it comes in three colors to match the ground.

Get a Quote

Why Choose Tenax Solido

Bonds, Seams and Repairs The mastic behind laminated edges, closed seams and filled chips. The only care product that adds material rather than treating a surface.
Three Colors to Match the Ground Black, white and transparent, so a repair matches the slab rather than settling for whatever is on the shelf.
Our Most Affordable Tenax Product From ₱1,600 for black and white, and a single tin covers a great many chip repairs.
Blends Best on Busy Stone On flecked and heavily patterned slabs the fill settles into the ground, which is where it performs best.

What Is Tenax Solido?

A polyester mastic for bonding, filling and repairing stone.

Tenax Solido is a polyester-based stone adhesive, made by Tenax in Italy. It is the mastic fabricators use to bond stone to stone, close seams, fill chips and pack the natural voids that some slabs arrive with.

It is a two-part product. The mastic is mixed with a hardener immediately before use and cures chemically rather than drying, which is why it sets hard enough to be sanded and polished level with the stone around it.

Customers often call it Tenax Mastic, or simply Tenax followed by a color. It is stocked in black, white and transparent, and the color matters more than people expect.

This is the only product in our care range that is a material rather than a treatment. The sealers and cleaners maintain a finished surface; Solido puts it together.

How Much Does Tenax Solido Cost?

Prices are subject to change without prior notice.

Color Starting Rates
Black ₱1,600
White ₱1,600
Transparent ₱1,900

Cut-out charges apply only when installation is included. Delivery is priced based on distance from your nearest Stone Depot branch.

Get a FREE Quote Today!

What Is Tenax Solido Used For?

Four jobs, and most of them happen during fabrication.

Bonding stone to stone

Laminated edges are the common case. Two layers of 18 mm slab bonded together read as a 36 mm profile, and Solido is the adhesive holding them. The same goes for mitred corners.

Closing seams

An L-shaped or U-shaped kitchen needs a seam somewhere, and the mastic fills and color-matches the join. This is why seams on a well-fabricated counter are visible up close but not obvious across a room.

Filling chips

A chip at an edge or a cutout fills, cures and sands back level. On natural stone the color runs through the full depth, so a filled chip disappears far better than on a surface-printed material.

Filling natural voids

Some slabs arrive with small natural pits or fissures, which is normal rather than a fault. Those are packed and polished during fabrication, which is why a finished counter looks more even than the raw slab.

How Do You Apply Tenax Solido?

Mix small, because the clock starts immediately.

1

Clean and Dry the Surfaces

Dust, sealer and grease all stop the mastic bonding. Clean the joining faces, let them dry completely, and do not seal a repair area until the fill has cured.

2

Mix Only What You Will Use

Add hardener to a small quantity and mix thoroughly. Once catalysed it begins curing, so mix in batches you can place within the working time rather than preparing the whole job at once.

3

Overfill, Then Sand Back

Pack the repair slightly proud of the surface, let it cure fully, then sand and polish level. Filling flush leaves a dip once it shrinks, and a dip is more visible than a color mismatch.

Solido is one of the stone care products we stock at every branch, in three colors so you can match the stone rather than settle for whatever is on the shelf.

Can You Repair a Chip Yourself?

Yes. Small ones, with patience.

Yes. A small chip at an edge or beside a sink is a realistic job for a careful homeowner. Clean it, mix a little mastic in the closest color, overfill, let it cure, then sand and polish back.

Keep the fragment if you still have it. A chip that has broken away cleanly can sometimes be bonded back rather than filled, and a rebonded fragment matches perfectly because it is the same stone.

The honest limit is scale. A chip the size of a fingernail is a home repair. A broken corner, a cracked slab or damage around a cutout is fabricator work, and attempting it yourself usually makes the professional repair harder.

Stone Depot does not offer repolishing or restoration services. We supply the material; the work is yours or your fabricator’s.

Will the Repair Be Invisible?

No. Close, on the right stone, at the right distance.

No. A filled repair is a color-matched patch of resin sitting in a piece of natural stone. From standing height on a busy granite it disappears. Under a downlight at close range, on a plain surface, you will find it.

Busy stone hides repairs best. A coarse mottle like Salt and Pepper or Tiger Orange breaks up a fill completely. A near-plain surface gives it nowhere to hide.

Veined stone is the hard case. Filling a chip that crosses a vein means matching both the ground color and the vein, and mastic comes in three colors rather than infinite ones. Expect a compromise.

Set the expectation before you start. A repair that is 90 percent invisible is a good outcome on natural stone, and far better than living with a chip.

Solido vs Our Other Stone Care Products

The only one that is a material rather than a treatment.

Solido builds and repairs

From ₱1,600 in black and white, ₱1,900 in transparent. Use it to bond, seam, fill and repair. It is the only product here that adds material to the stone rather than treating the surface.

Proseal protects countertops

Tenax Proseal at ₱4,600 repels oil and water from inside the pores. Seal after a repair has cured, not before, or the mastic will not bond.

Hydrex protects walls and floors

Tenax Hydrex at ₱3,500 repels water, for cladding, flooring and outdoor stone.

Cera Fluida finishes the surface

Tenax Cera Fluida at ₱3,500 deepens color and adds sheen. Worth knowing after a repair, since a wax can help a filled area blend with the stone around it.

Which Color Should You Choose?

Match the ground, not the pattern.

Choose against the dominant background color of the slab rather than against a vein or a fleck. On a grained stone the ground is what the eye reads, and matching a black fleck on a white granite leaves a dark dot.

Black suits the dark granites, so Absolute Black, Black Galaxy, Tan Brown and the darker Sapphire quartz. White suits the pale whites and grays, including Caesar White, Moonstone and the Calacatta quartz range.

For the warm neutrals — Marigold, Beige Porrino, Crema Marfil and both travertines — ask the branch which of the three works best against your slab.

Transparent is for seams on veined or translucent stone where any solid color would show as a line. It is the hardest to use well, because it takes on the color of whatever is behind it, so test on an offcut first.

Frequently Asked Questions

Is Tenax Solido the same as Tenax Mastic?

Yes. Customers ask for it as Tenax Mastic, Tenax White, Tenax Black or simply Tenax and a color. It is the same polyester stone adhesive, stocked in black, white and transparent.

Which color should I buy for my counter?

Match the dominant background color of the slab rather than a vein or a fleck. Black for dark granites, white for pale whites and grays, and transparent for seams on veined stone. Bring a photograph if you are unsure.

Can I fix a chip myself?

A small one, yes. Clean it, mix a little mastic in the closest color, overfill, cure, then sand and polish level. A broken corner, a crack or damage around a cutout is fabricator work.

Will the repair be invisible?

Close, but not perfect. Busy flecked stone hides a fill almost completely; near-plain surfaces and veined stone show it under direct light. Ninety percent invisible is a good outcome on natural stone.

Can I use it on engineered quartz?

Yes, and fabricators do for seams and edges. Repairs on plain quartz designs show more than on natural stone, because there is no pattern to break up the fill and the color is perfectly uniform.

Do I seal before or after a repair?

After. Sealer on the repair area stops the mastic bonding properly. Fill first, let it cure fully, sand and polish, then seal the whole surface.

How long does it take to cure?

It cures chemically once the hardener is mixed in, so working time is short and full cure follows within hours. Mix small batches you can place before it sets, and check the tin for current times.

Where can you buy Tenax Solido in the Philippines?

Stone Depot offers Tenax Solido at branches in Cebu, Davao, Cagayan de Oro, Iloilo and Laguna, from ₱1,600 depending on color. Stock varies from branch to branch, so it is worth checking before you visit.

Bring a photograph of the stone and the branch will help you pick between black, white and transparent. All branches are open Monday to Saturday, 8 AM to 5 PM, and you are welcome to visit or contact any branch.

Send Your Plan and Get an Estimate Within 24 Hours

Free and no obligation. Or drop by any of our branches and we will provide you a quotation on the spot.

Get a FREE Quote Today!
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Tenax Solido (Stone Adhesive)”

Your email address will not be published. Required fields are marked *

Scroll to Top