Photo is for reference only. Color, veining, and shading vary between slabs. Visit our slabyard to select your material in person.

Emerald Pearl

₱8,000 per sqm

Quarry: Norway
Surface Finish: Polished
Edges: Natural (Unpolished)
Thickness: 18 mm
Requires Sealing: Yes

Switch on the pendants above the island and green and gold start coming up out of the black. Emerald Pearl is dense Norwegian stone that shrugs off knives and grit, and it settles back to near-black as the light moves.

Quarry	Norway
Surface Finish	Polished
Edges	Natural (Unpolished)
Thickness	18 mm
Requires Sealing	Yes

Get a FREE Quote Today!See Other Granites

Available at all 5 branches. Custom-fabricated and installed in 3-5 days.

Get a Quote

Why Choose Emerald Pearl

Unique Appearance Crystals flash green and gold under directional light, settling back to near-black when the light moves.

Highly Durable Dense Norwegian stone that shrugs off knives, grit and years of daily use.

Heat-resistant Hot cookware goes straight onto the surface with no risk of scorching.

Quarried, Not Manufactured Cut from a single block rather than mixed in a factory, so every slab carries the geology of the place it came from.

What Is Emerald Pearl Granite?

Near-black ground, green and gold flash.

Emerald Pearl is a very dark gray to near-black stone carrying crystals that flash green, gold and occasionally silver when light strikes them at the right angle. The ground reads almost solid until the light moves.

Where a plain black granite gives you depth and nothing else, this one gives you depth that changes. Stand still and it settles; walk past and it fires.

Where Does Emerald Pearl Come From?

It is quarried in Norway, in the Larvik region south of Oslo, from the same geology that produces Blue Pearl. Both are larvikites rather than true granites in the strict petrological sense.

The trade has sold larvikite as granite for decades and it behaves like one in a kitchen. Norway is the only commercial source, which is part of why it sits at the top of the price range.

Why Does It Shimmer?

The flash comes from feldspar crystals within the stone. Light enters a crystal, reflects off its internal layers, and those reflections interfere with each other, cancelling some wavelengths and amplifying others.

What reaches your eye is a flash of green or gold depending on your angle. It is an optical property of the rock rather than anything applied during polishing, so it cannot wear off.

How Much Does an Emerald Pearl Countertop Cost?

Prices are subject to change without prior notice.

Item	Starting Rates
Emerald Pearl slab	₱8,000 per sqm
Fabrication	₱500 per lm
Installation	₱500 per lm
Sink or hob cut-outs	₱500 per set

Cut-out charges apply only when installation is included. Delivery is priced based on distance from your nearest Stone Depot branch.

Get a FREE Quote Today!

Why Lighting Decides How Emerald Pearl Looks

Under flat light it is simply a dark counter.

The flash depends on the angle between the light source, the crystals and your eye. Change any one of those and the stone looks different.

Under a single ceiling fixture Emerald Pearl reads as near-black and little else. Under directional light it comes alive, and the green becomes obvious rather than subtle.

Plan the lighting before you commit to the slab, not after the counter is in.
Pendants over an island are the most reliable way to activate the crystals.
Under-cabinet strips work along a back run where a ceiling fixture cannot reach.
Warm light brings out the gold, and cool light favours the green.

This matters more with Emerald Pearl than with Blue Pearl, because the darker ground gives the eye less to work with when the crystals are not firing. A poorly lit Blue Pearl is a gray counter, and a poorly lit Emerald Pearl is a black one.

If your layout cannot carry directional light, Black Galaxy gives you visible interest from its bronze flecking without depending on the angle.

How Do You Clean Emerald Pearl Granite?

Three habits that keep the crystals firing.

Clean as You Go

The dark ground hides crumbs well, which is convenient until something acidic sits long enough to matter. Clear spills as they happen rather than at the end of the day.

Use Only Granite Cleaner

Dish soap leaves a residue that dulls the polish, and a dulled polish scatters the light before it reaches the crystals. That costs you the flash you paid for.

Always Keep the Surface Dry

Standing water spots a dark polish and interrupts the reflection. A dry pass with a microfiber cloth restores both the finish and the effect.

We stock specially-formulated granite cleaners at every branch, so pick one up when you collect your slab.

How Do You Care for Emerald Pearl Granite?

Three habits, and sealing is the one that matters.

Seal It When It Needs It

Unlike the dense black granites, larvikite does need sealing. How often depends on how hard the counter works, so test it with water rather than working to a calendar.

Always Use a Cutting Board

The stone will not scratch easily, but it dulls knives faster than timber does. A board protects your blades and keeps the polish even where you always work.

Never Sit or Stand on It

Granite is hard but not flexible, and an unsupported overhang can crack under body weight. Pull up a step stool rather than climbing on the counter.

Is Emerald Pearl Granite Good for Kitchen Countertops?

Dense, hard-wearing and forgiving of mess.

Yes. Behind the unusual appearance this is a conventional, hard-wearing granite that behaves well in a working kitchen.

Hot cookware can go straight onto the surface without scorching it, unlike engineered quartz.
Knives and daily use rarely leave visible marks on a stone this hard.
The near-black ground hides crumbs, coffee rings and minor wear almost entirely.
Acid does not etch it, so calamansi and vinegar leave no dull spots.
Sealing is needed from time to time, which separates larvikite from the dense blacks.

Against Absolute Black the trade is straightforward. You pay more and take on occasional sealing, and in exchange the counter has something happening in it.

Islands earn this stone its price, because that is usually the only surface in a kitchen with light directly overhead.

Does Emerald Pearl Granite Need Sealing?

It does, unlike the dense blacks.

Yes. How often depends on how hard the counter works. Reseal when the surface starts to darken where liquid has been sitting, which a busy kitchen will reach sooner than a vanity.

This is where larvikite differs from Absolute Black and Black Galaxy, both of which are dense enough to skip sealing entirely. The structure here is slightly more open, so sealer penetrates and does useful work.

Test it when you are unsure. Put a few drops of water on an inconspicuous part of the counter, leave them 15 minutes and wipe. A darker patch where the water sat means the sealer has worn through.

Sealing is inexpensive and takes minutes. Treat it as routine rather than a fault, and the stone performs for decades.

What Colors Go With Emerald Pearl Granite?

A near-black ground with green and gold flash.

The green in the crystals gives this stone a cooler bias than a bronze-flecked black, but the gold keeps it from reading cold. That combination makes it more flexible than it first appears.

White and cream cabinetry is the strongest pairing. The contrast is high, and a pale surround gives the crystals a bright field to fire against.

Timber works particularly well, especially mid-tone oak and walnut. The warmth picks up the gold, and the pairing feels less severe than white against near-black.

Deep green cabinetry is the adventurous choice and it works, because the green in the joinery echoes the green in the flash.

Brass and champagne fixtures suit the gold. Chrome and stainless keep it cool and modern, which suits a scheme built around the green rather than the gold.

Frequently Asked Questions

What is the difference between Emerald Pearl and Blue Pearl?

Same Norwegian quarry region and the same optical effect, different coloring. Emerald Pearl reads as a black counter that catches light; Blue Pearl reads as a gray one. Blue Pearl has a mid to dark gray ground flashing blue and silver, where Emerald Pearl is much darker and flashes green and gold.

Both cost ₱8,000 per square meter and both need sealing as required. Choose Emerald for contrast against pale cabinetry, and Blue Pearl if you want the counter to sit closer in tone to a gray scheme.

Why does my Emerald Pearl look plain black?

Because the light is wrong, not the stone. The flash depends on directional light hitting the crystals at an angle, and a single flat ceiling fixture will not produce it.

Add pendants over an island or under-cabinet strips along a back run. The effect returns immediately.

How lighting changes this stone

Is Emerald Pearl actually granite?

Geologically, no. It is a larvikite, named after the Larvik region of Norway, and it differs from true granite in mineral composition.

The trade has sold it as granite for decades and it performs like one: hard, heat-tolerant and durable. The label is loose, and the behavior is not.

Does the green flash fade over time?

No. The effect comes from the crystal structure inside the stone rather than a coating, so there is nothing to wear away or bleach out.

What reduces it is a dulled polish. Soap residue and abrasive cleaners scatter light before it reaches the crystals, and a granite-safe cleaner restores the reflection.

Can Emerald Pearl be used outdoors?

Yes. Granite is UV-stable and will not fade in Philippine sun, so lanais, dirty kitchens and pool bars all suit it.

Keep the sealing up, since outdoor surfaces take more weather and will ask for it sooner. Consider a leathered or flamed finish anywhere underfoot, because polished stone is slippery when wet.

How often should you reseal Emerald Pearl?

When the water test says so. A few drops left 15 minutes will darken the stone if the sealer has worn through, and that is the only reliable signal.

A hard-working kitchen counter asks sooner than a vanity, so test rather than diarise.

Is Emerald Pearl worth the premium over Absolute Black?

It depends entirely on your lighting. With pendants or directional light overhead, the difference is obvious and the premium buys you a counter that changes through the day.

Without that lighting you are paying ₱8,000 for something that reads much like Absolute Black at ₱4,700, and Absolute Black never needs sealing.

Where can you buy Emerald Pearl granite in the Philippines?

Stone Depot carries Emerald Pearl at all five branches: Cebu, Davao, Cagayan de Oro, Iloilo and Sta. Rosa, Laguna. Each branch holds its own inventory, so availability varies by location.

This is a stone that has to be seen in person, because no photograph shows what the crystals do when you move. All branches are open Monday to Saturday, 8 AM to 5 PM, and you can message any branch on Facebook or email email@stonedepot.com.

Send Your Plan and Get an Estimate Within 24 Hours

Free and no obligation. Or drop by any of our branches and we will provide you a quotation on the spot.